LiveAquaria Approved Aquatic Supplies: DrTim's Aquatics Bashsea Pellet Master 3 Reactor Kit
Free Shipping!
Home > Aquarium Supplies > Aquarium Filters, Skimmers & Reactors > Media Reactors > DrTim's Aquatics Bashsea Pellet Master 3 Reactor Kit
DrTim's Aquatics Bashsea Pellet Master 3 Reactor Kit
DrTim's Aquatics Bashsea Pellet Master 3 Reactor Kit
Additional locales and sizes may be available!
Product Notes:
· We cannot ship this product to Alaska.

Please Note: Return of electrical equipment to LiveAquaria for exchange or refund is limited to 30 days from the date of purchase. Beyond 30 days, please contact the manufacturer for repair or replacement as covered by the manufacturer's warranty.

We're sorry, this item cannot be shipped by air.
 
Rewards Program

Overview

*900ml capacity media reactor kit boosts natural aquarium filtration
*Includes components for convenient setup (pump, tubing & media)
*Optimize nitrate & phosphate removal in aquariums up to 300 gallons

Complete media reactor kit optimized for superior nitrate and phosphate removal. DrTim's Aquatics Bashsea Pellet Master 3 Reactor Kit allows for setup ease and great SAVINGS. Properly matched reactor kit components maximize efficient use of >DrTim's Aquatics NP-Active Pearls for natural and effective removal of excess nutrients, excellent aquarium water quality and keeping nuisance algae at bay through the cultivation of nitrate and phosphate reducing bacteria. Included components selected for installation at sump level.

Holds up to 900 ml of NP-Active Pearls, enough for a 300-gallon aquarium.

PM-III Reactor Kit includes: Pellet Master-III for aquariums up to 300 gallons, 900ml NP-Active Pearls, Eugene Danner Aqua Supreme Magnetic Drive Pump SP-400, corrosion-resistant Herbie Clip "K" plastic clamps (2-pk) and a 5 ft length of 3/4" ID Flex Vinyl Tubing.

Reactor Model Media Capacity Operating Flow Rate Aquarium Size Dimensions
PM-3 900ml 350-450 gph Up to 300 gallons 8" dia x 15" high

Instructions for DrTim's Aquatics Bashea Pellet Master I, II & III
Start with 1/3 the normal amount of DrTim's Aquatics NP-Active Pearls. For example, if your aquarium is 60 gallons and the normal amount of NP-Active Pearls is 3 ml per gallon, then use 60 ml of NP-Active Pearls or a volume of about 2 oz of NP-Active Pearls (1/3 of 180ml ((3ml x 60 gallons)) = 60 ml).

To add the NP-Active Pearls to the DrTim's Aquatics Bashea Pellet Master Reactor:

  • Loosen (but do not remove) the Black Bolts on top of the reactor.
  • Press down on the top and turn so the large holes in the Blue Plate line up with the top of the bolts. Then remove the Top.
  • Reach in and remove the Screen.
  • Pour the NP-Active Pearls into the reactor and then replace the Screen.
  • You can now fill the reactor with some water to the level of the Screen.
  • Now replace the Top, making sure the O-ring is positioned correctly.
  • Carefully tighten the bolt snug but do not over-tighten.
Installation
  • Place the reactor near your tank or sump.
  • Slip 1/2" ID tubing (3/4" if using PM-III) over the output fitting of the powerhead or water pump. You may have to warm the tubing under hot water to make the tubing more pliable. Position the powerhead or water pump in the tank/sump and then stretch the tubing over the reactor.
  • Carefully cut the tubing to the needed length and slide the end over the fitting on the top of the reactor labeled "IN."
  • Take another piece of tubing and slide the end over the fitting on the top of the reactor labeled "OUT."
  • Run the tubing over to the tank/sump and position it so the tubing will not fall out of the tank/sump when the water is turned on.
  • Plug in the powerhead or water pump and check for any leaks. There may be some air bubbles trapped in the reactor but don't worry, they will clear out on their own.

After four weeks, add another 1ml of NP-Active Pearls per gallon to the reactor. Repeat after eight weeks to achieve the full-recommended amount of NP-Active Pearls of 3ml per gallon.

Note: If your tank currently has a large amount of algae or red slime (cyanobacteria), use >Dr Tim's Aquatics Waste-Away Natural Aquarium Cleaner.

Customer Testimonials

No testimonials have been submitted for this product.

Would you like to submit a testimonial? Click here

Bookmark and Share
DFS21