LiveAquaria Approved Aquatic Supplies: Neptune Systems AquaController Apex Energy Bar Expansion Module
Free Shipping!
Home > Aquarium Supplies > Used By LiveAquaria® > Neptune Systems AquaController Apex Energy Bar Expansion Module
Neptune Systems AquaController Apex Energy Bar Expansion Module
Neptune Systems AquaController Apex Energy Bar Expansion Module

Please Note: Return of electrical equipment to LiveAquaria for exchange or refund is limited to 30 days from the date of purchase. Beyond 30 days, please contact the manufacturer for repair or replacement as covered by the manufacturer's warranty.

 
Rewards Program

Overview

*High-tech controllable outlet for Neptune Systems Apex aquarium controllers
*Customize & protect function of numerous electrical aquarium equipment
*Expandable design allows custom configuration for ultimate aquarium control

Explore unprecedented possibilities in aquarium control while protecting your investment. Neptune Systems AquaController Apex Energy Bar Expansion Module features an innovative and highly expandable design to power the AquaController Apex Base Unit, Apex Display and Apex Accessories. Independently controllable outlets PLUS built-in AquaBus Connection ports allow easy addition and control of numerous aquarium accessories. Multiple EnergyBars can be daisy chained together for HUNDREDS of controllable outlets at your command!

Neptune Systems AquaController Apex Energy Bar Expansion Module boasts numerous safety features including a programmable failsafe state. Configure each Energy Bar outlet to be either in an OFF or ON state to address power failure or communication failure with the Apex base unit according to your preference. Soft-Start feature slowly brings pumps, wavemakers and other aquarium equipment to full power to prevent harsh and damaging ON/OFF cycles. Built-in sensor monitors overall power consumption and continually sends this information to your Apex controller for invaluable power utilization data. Quality 16 gauge, powder-coated aluminum construction.

Use Neptune Systems AquaController Apex Energy Bar Expansion Module with your existing Apex Jr Kit, or Apex Kit to automate more aquarium functions. Use an additional Energy Bar on a UPS (uninterruptible power supply) for a lifesaving alternate power source!

Energy Bar 4 features 4 independently controllable 120V Outlets (3 outlets @ 8 Amps, 1 outlet @ 12 Amps, total current must be less than 15 Amps) and 4 built-in AquaBus Connection ports. Up to 240 EnergyBar4 modules can be connected together for up to 960 switched outlets on a single AquaBus. EnergyBar 4 measures 7.25" x 3.75" x 1.8" high.

Energy Bar 8 features 8 independently controllable 120V Outlets (6 outlets @ 5 Amps, 2 outlets @ 10 Amps, total current must be less than 15 Amps) and 6 built-in AquaBus Connection ports. Up to 240 EnergyBar 8 modules can be connected together for up to 1920 switched outlets on a single AquaBus. EnergyBar 8 measures 10.0" x 3.75" x 1.8" high.

EnergyBar 4 Features
The EnergyBar 4 module features 4 independently controllable outlets. With power failure detection, active electrical current monitoring, and fail-safe features make this power bar far better than any competing units.

  • 4 independently controllable 120V Outlets (3 outlets @ 8 Amps, 1 outlet @ 12 Amps, total current must be less than 15 Amps).
  • Built-in 4 port AquaBus hub so that accessories can be easily added.
  • Communicates with and powers the AquaController Apex Display, base unit and accessories through the AquaBus.
  • Active electrical current monitoring and logging through the AquaController Apex.
  • Fail-safe setting. If communication failure occurs between the AquaController Apex and the EnergyBar 4, each outlet can be configured to revert to a user settable default setting.
  • High reliability direct-wired connection to the Apex System through the AquaBus (does not use X10).
  • Completely silent operation on the solid state switched outlets.
  • "Soft-Start" on the solid state switched outlets for reduced pump wear.
  • Two outlets with relay switching for higher power switching.
  • Up to 240 EnergyBar4 devices can be connected together for up to 960 switched outlets on a single AquaBus.
  • Built-in circuit breaker protected.
  • 4 Mounting Holes for easy installation.
  • Compact custom aluminum enclosure (7.25" x 3.75" x 1.8").

EnergyBar 8 Features
The EnergyBar 8 module features 8 independently controllable outlets. With power failure detection, active electrical current monitoring, and fail-safe features make this power bar far better than any competing units.

  • 8 independently controllable 120V Outlets (6 outlets @ 5 Amps, 2 outlets @ 10 Amps, total current must be less than 15 Amps).
  • Built-in 6 port AquaBus hub so that accessories can be easily added.
  • Communicates with and powers the AquaController Apex Display, base unit and accessories through the AquaBus.
  • Active electrical current monitoring and logging through the AquaController Apex.
  • Fail-safe setting. If communication failure occurs between the AquaController Apex and the EnergyBar 8, each outlet can be configured to revert to a user settable default setting.
  • High reliability direct-wired connection to the Apex System through the AquaBus (does not use X10).
  • Completely silent operation on the solid state switched outlets.
  • "Soft-Start" on the solid state switched outlets for reduced pump wear.
  • Two outlets with relay switching for higher power switching.
  • Up to 240 EnergyBar 8 devices can be connected together for up to 1920 switched outlets on a single AquaBus.
  • Built-in circuit breaker protected.
  • 4 Mounting Holes for easy installation.
  • Compact custom aluminum enclosure (10.0" x 3.75" x 1.8").

Customer Testimonials

No testimonials have been submitted for this product.

Would you like to submit a testimonial? Click here

Bookmark and Share
DFS23
Contact us
LIVE HELP
8:30 am - 5 pm CST
7 days a week

EMAIL US
CALL US
1-800-334-3699
8:30 am - 5:00 pm CST, Mon - Fri